Skip to main content

2 replies

New build

Warthog_DriverWarthog_DriverOGR Forum Member

Afternoon all. Just wanted to post a few pics of the fold-away table for the garage.  I have wanted to start a small layout for a long time now.  I wanted to be able to fold up the layout, keep buildings and such mounted, and still be able to incorporate two separate train lines.  A larger Fastrack layout with a smaller, simpler, O-27 tubular loop within for a 1949 Prairie Steamer #2026 locomotive set. I am using AnyRail for the layout design.

The board is only 8 feet x 5 feet but I should be able to expand around the back of the garage...one day.

I used the 2 inch foam board and simply mounted to the lattice work of 1x3 with a 1x6 surround.  The board is rigid and still pretty light. The layout has 9 inches of height clearance in the folded position so I still have the option for a small mountain tunnel and possibly elevated tracks.



Jan 2021 Two Lines   PXL_20210103_180444796.MPPXL_20210103_191453567PXL_20210114_181504119PXL_20210114_190840436PXL_20210116_190523632PXL_20210116_190529762

Attachments

Hide
Images (7)
  • Jan 2021 Two Lines
  • PXL_20210103_180444796.MP
  • PXL_20210103_191453567
  • PXL_20210114_181504119
  • PXL_20210114_190840436
  • PXL_20210116_190523632
  • PXL_20210116_190529762
Original Post

Replies sorted oldest to newest

AtoZ LewisAtoZ LewisOGR Forum Member DIGITAL SUBSCRIBER

Hi Warthog, I really like your table design. I have some FasTrack modules taking up space in my garage that I was going to convert into a fold down table this summer. Your's will likely be lighter than mine, but have you considered adding some gas shocks (like car hatchback ones) to ease the lowering? Also I'm guessing that that plastic work table acts as the legs when folded down. I was going to add some "swinging" 2 x 4's to the sides to act as the legs.

The one thing I don't get, I'm assuming you really are not going to put the ZW transformer in the middle of the table.

Warthog_DriverWarthog_DriverOGR Forum Member

I did consider gas shocks.  I'll have to see how heavy the board becomes after track and the layout gets filled in.  Right now it is very light and pivots well with just the hinges.  I am simply using two Dewalt Work Tables as the supports since I already had them and did not want to build legs that I would need to store somewhere and I wanted to keep as much weight off the folded up table as I could.

Funny, no, I am not leaving the KW transformer on the board.  I was just goofing with the add ins on AnyRail.

Add Reply

Views: 355
Post
The Track Planning and Layout Design Forum is sponsored by

AN OGR FORUM CHARTER SPONSOR

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×