Skip to main content

     I am adding a second level to my layout.  Lionel remote control switches are powered on the 1st level by a separate transformer, & controlled by SC-2s using Legacy command system.  That level is powered by two 180 watt bricks connected to a TPC 400.  It is larger than the proposed 2nd level with 5 trains consisting of heavyweight passenger cars.

     My plan is to power the 2nd level with 1 or 2 180 watt bricks & a TPC 300.  It will have only 1 traditional / conventional freight train operating on it.

     My questions are:

1) can I power the switches on the 2nd level with the same power source as powers the switches on the 1st level?

2) if I do, will the same switch power souce for both levels cause a problem since there will be two different track power sources?

Original Post

Replies sorted oldest to newest

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×