Can this be done? I’d like to swap out a pair of riveted plastic trucks for screw mounted sprung trucks. It looks fragile and if I break something….ugh! Thanks.
Original Post
Replies sorted oldest to newest
Mark, it looks like I might have done this with an MPC Illinois Terminal quad by snapping out the ends from the hopper body, then drilling out the rivets, and replacing with the sprung trucks and screws, then snapping the end assembly back in. It does look tricky, though. I should mention it looks like they snap out from the sides, and the ends can drop down.
Thanks, Artie. I’ll take a good look at it. May require more finesse than I can provide!
