Skip to main content

I would like kids to be able to switch lights on and off on our layout. There may someday be operating accessories that would require a momentary pushbutton switch. The places where I will mount the switches will be either 3/4" thick 1x4s or 1 1/2" thick 2x4s.

What do you suggest? I imagine some rocker switches and some pushbuttons. Open to other recommendations, though.

Cheaper is better, within reason; will likely order from digikey. Safety is good, too. I prefer rocker switches to toggle switches because I can easily envision my kids (and, perhaps more likely, me) hitting their heads or eyeballs on the switches, harming the switch or person.

Regards,
Jonathan
Original Post

Replies sorted oldest to newest

Jonathan,

I used these illuminated switches to control the interior and accessory lights on my layout.



Here's the ordering information:


Mouser Electronics
www.mouser.com
1-800-346-6873

Stock # 112-R13-112AH-W4
Shin Chin Part # R13-112AH-W4-02-UB D
Body of switch: Blue
Button: Black
Illumination color: Blue
Rating: 10A/250VAC

Note: The switch is 20.2 mm in diameter, roughly 3/4". There is a keyway on one side to keep the switch from rotating when in use after mounting on the control panel.

They do not come with any wiring instructions (surprise, surprise!). I can send you a copy of my hand-drawn version if you need it.
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×