I’m trying to finish the second loop on my 8x8 train layout, but I was just wondering what piece of fastrack would I need for this small section? I think I have an idea I’m just not sure what size to get.
Attachments
Images (1)
Original Post
Replies sorted oldest to newest
What is the measurement of the space between them?
You have the 1 3/8", 1 3/4", 3.0", 4.5" and 5.0" pieces available. You'll need a combination of those to fit the space. Sometimes you have to remove one adjacent straight piece and build it up over a longer stretch using the smaller pieces to make everything fit.
Measure the distance and then use this chart.
@John H posted:Measure the distance and then use this chart.
I’m sorry, but I’m not sure how to use this chart.
Here is a better chart to use. It covers gaps up to 30 inches. Just follow John's guidance in filling the gap. I've included a guide with an older chart.
Jan
Attachments
Files (2)
Assuming those are O-36 switches with the 11.25° pieces attached, you'll need three 1 3/8" pieces to fill the 4 1/8" (4.125") space. If you look at Jan's chart, you'll see the 4 1/8" length in the left column and then the 3 in the 1 3/8" column to the right.
And, you can also check Jan's chart to see all the track combinations that can be used to fill the total length of 24 1/8". You'll see there are well over 30 combinations to choose from.
FWIW, Jan's chart is easier to use for those of us who tend to think in terms of fractions vs decimals, but all 3 charts get the same results.
Attachments
Images (1)
