Skip to main content

Replies sorted oldest to newest

1) You will need the 990 Legacy set (Base plus remote)

2) If you are using any PowerMasters you will need a PowerMaster bridge
3) If you are using a TPC, they just wire in

 

Disconnect the single wire from the TMCC base and move it to Legacy base. If you want to use the Legacy system and the TMCC Cab-1 base/controller at the same time, use the cable shipped with the Legacy set to tie them together. Never have the TMCC base wired to the track at the same time the Legacy base is wired to it

You will need to enter your engines into the Legacy base using your already assigned engine ID's

It's that easy.

Post
×
×
×
×
Link copied to your clipboard.
×
×