Skip to main content

2 replies

Wifi 6.0 Upgrade procedure.

gg1mangg1manOGR Forum Member MEMORIALIZED MEMBERMEMORIAL SUPPORTER

Hi, I have the DCS Wifi 5.0 application and it is working fine from my I-Phone. But after down loading the new 6.0 application from the MTH website I can not find any information on how to iniciate it, or get it to loade to my TIU and controler. As stated above both have the 5.0 on them and they work fine.

I can find no up grade procedure on the MTH web site or the DCS Compainion - version 3.

For some reason I am under the impression that after the 5.0 upgrade was completed the loader procedure of isolation and cables would be unnecessary. 

Where am I going wrong?

Thank's for your help.

 

 

Original Post

Replies sorted oldest to newest

MartyEMartyEOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBERMEMORIAL SUPPORTER

The upgrade procedure starts on page 134 of the 3rd Edition of the DCS Companion.  The procedure is still the same as it's been since I've been doing upgrades.  The 1/8 stereo mini is still need  for the TIU upgrade as is the 4 conductor phone handset cord for the remote.  Depending on your TIU and PC you'll need a serial cable , USB to serial, or USB cable to connect between the TIU and PC.  It's all in the book.

Last edited by MartyE

Add Reply

Views: 232
Post
The DCS Forum is sponsored by

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×