Williams U33C Question

Wire the motors in series.

Series wiring can have a marvelous effect on many dual-motor locos. I have a
former PS1 MTH NS SD60 that I bought cheap-ish with fried electronics, and a few years

ago had Train America update it (I had yet to start doing that myself) with TMCC, but no EOB - that had yet to come out. It ran well, and was no speed demon, but was still just a little too eager. 

A couple of weeks ago I popped the top and wired the motors in series, and, honestly,

it acts (almost) as if it has cruise control. Took 15 minutes, screwdriver to screwdriver.

I did this to a set of K-Line F units that only ran at race car speed....now they behave like high dollar units with great control. Easy too!

Is there a diagram on exactly which wires are which??

Thanks,

Alan

Found this in another forum.

Two wires taken off the reverse board and rewired to make one circuit is rather simple.

Andrew