Hi Folks,
I purchased Z-Stuff Crossing gates. Wired them up per the instructions -
-Red from one gate to the other gate and to transformer red terminal
Black from one gate to the other gate and to transformer black terminal
Blue from one gate to the other gate
The transformer terminals are for 0-14v range
Aligned gates IR LED and SENSOR are aligned, the RED Indicator LED will go out.
When train breaks train breaks light beam path. One gate will go down with lights flashing and then rise and lights will stop flashing after path is clear. However, the other gate will go up and down in a jerky motion and lights will continue to flash even after light beam path is clear.
Any ideas?
Thanks,
Frank
