Hi guys was replacing hand rails but acadently pull a wire of the e_unit it's the red wire that connected to the switch in the back head don't know where on the e_unit it goes
Since it comes from the switch, I think is has to go to one end of the e unit coil. Look for an insulated terminal with solder and no wire on it...on the other side of the coil from the one you pictured?
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!