30-20078-1 ABA SET SMOKE SYSTEM MTH PROTO SOUNDS 3 SANTS FE F3 S UNIT SMOKE ISSUE

Lowes2winOGR Forum Member

I cant seem to get it right with this F3 SANTA Fe with the diesel smoke unit. Either it smokes all threw out or it doesnt smoke snd when it finally does smoke threw the 2 stacks it only lasts s few mins. My Steam Engine PRR 2-8-0 always works perfect but the F3 Diesel smoke system just isn't working right and I don't know what to do. Frustrating. It is from the 2011 ABS SantaFe passenger engine just the head A unit is the smoke unit and it's not working right. MTH had always been great but I don't know if I flooded it and messed up the wick or what. Any help would be greatly appreciated Thank you

12/22/139:19 PM

❤️ 0

Original Post

c.samOGR Forum Member DIGITAL SUBSCRIBER

Try putting an adequate amount of fluid in about 3-5 minutes before starting up. Be sure to blow into the openings to free any bubbles in the system. MTH units are usually pretty fool-proof..

12/22/139:32 PM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!