Can some one post a picture of the launcher spring assembly? I picked one up and the spring rotates internally so the missile can't launch. Not sure if the spring is correct, or what the method is for locking the spring as I examine the laucher. Thank you, G
Replies sorted oldest to newest
There is a small notch between the two halves that make up the launcher assembly. There should be a small tab on the back of the spring that is sandwiched between the two halves. The notch is on the bottom side, about 1/2 way between the end of the curved part and the "wing".
CW, Thank you. The internal bore is smooth, though there is a small slot inbetween halves, but it looks like a very small piece of plastic is chipped.
Did the plastic launcher have a plastic tab that protuded into the barrell.
The spring has the end bent back over and aligned with the spring axis. This looks like it should rest against a stop inside the barrell.
I wonder if I should just make a small metal tab that I can insert between the 2 plastic halves to act as a stop for the spring.
Access to this requires an OGR Forum Supporting Membership
