Skip to main content

My 10-by-5 layout, the New York, Trumbull & Boston Railroad, is on the cover of OGR Run 304 (February/March 2019) which also includes an article. The layout models a single-track New England branch line in the 1940s and early 1950s. The north side of the layout has a tunnel and a scratch-built truss bridge and trestle crossing a river-valley lined by four factories. The south side of the layout models a small downtown with cobblestone streets. Comments on the article appreciated.

MELGAR

MELGAR_1_2019_0111_05_LAYOUT_OVERVIEW_EMELGAR_2_2019_0112_01_NORTH_END_EMELGAR_3_2019_0112_04_VALLEY_AND_BRIDGES _EMELGAR_2019_0112_06_LAYOUT_OVERVIEW_E

Attachments

Images (4)
  • MELGAR_1_2019_0111_05_LAYOUT_OVERVIEW_E
  • MELGAR_2_2019_0112_01_NORTH_END_E
  • MELGAR_3_2019_0112_04_VALLEY_AND_BRIDGES _E
  • MELGAR_2019_0112_06_LAYOUT_OVERVIEW_E
Original Post

Replies sorted oldest to newest

Congratulations to you on the publication of your article and photos.

Note the publisher may not allow your posting of photos in the forum if the same photos were part of the article they published. Might want to check on that.

I know the several of my articles which have been published in O Scale Trains and O scale Resources have all had this restriction.

Bob

flanger posted:

Note the publisher may not allow your posting of photos in the forum if the same photos were part of the article they published.

These photos are similar to those in the article but are new and were taken on 01/11/2019 - after Run 304 arrived by mail. Article and layout pictures are, and will remain, exclusive to OGR and Forum. Many more photos in article.

MELGAR

Congratulations, MELGAR. I am very happy for you. It is quite exciting to be presented in OGR, so I know you are very, very pleased. I hope you have ordered multiple copies of your Run. I ordered several dozen, of each Run, so that we could give them to guests who came to our home to see the layout. If I may offer that advice, get yourself many copies of your treasure. People will treasure them from you.

FrankM

Well MELGAR, now your Famous, and rightfully so, Your Layout is simply Wonderful. Congratulations on a job well done, as I look forward to reading your story this afternoon and having seen your name on the OGR Forum, I knew this would be Fantastic. To be seen in this magazine is a great accomplishment, keep up the great and fun work as this is The Best Hobby in the World.  Happy Railroading. Leapin Larry.

Moonson posted:

Congratulations, MELGAR. I am very happy for you. It is quite exciting to be presented in OGR, so I know you are very, very pleased. I hope you have ordered multiple copies of your Run. I ordered several dozen, of each Run, so that we could give them to guests who came to our home to see the layout. If I may offer that advice, get yourself many copies of your treasure. People will treasure them from you.

FrankM

Frank,

Thank you very much. I plan to do exactly as you suggest. Your appreciation means a lot to me.

And thanks to everyone who has responded.

MELGAR

Last edited by MELGAR

Melgar's article and photos in OGR are a must read. The article is very clear and beautifully written. 

In case you folks didn't know, Melgar is a retired aerospace engineer who, among other things, worked on the Hubble Space Telescope, and taught aerospace engineering as a college professor. 

He applies the same precision and skill to his modeling, photos, writing, and teaching of modeling as he did to his work as an aerospace engineer.

Arnold

Last edited by Arnold D. Cribari
OKHIKER posted:

Melgar, your layout is absolutely superb.  Can you tell us exactly what materials went into the construction of your truss bridge and trestle?  Both structures are very realistic and appear very sturdy.

Thank you OKHIKER. Both bridges made from basswood strips with various cross sections. Reinforcing gusset plates on the truss bridge (1/32-inch thick basswood sheet) make it very strong. Trestle uses 1/4-inch square cross section (one foot full scale) for the columns - so also quite strong.

MELGAR

MELGAR_2019_0112_10_BRIDGE_PLATES

Attachments

Images (1)
  • MELGAR_2019_0112_10_BRIDGE_PLATES

Melgar, that is a neat little layout, it just showed ME that I have no excuse for not having a layout.  I really like what you've done and it is just chuck full of wonderful structures and great looking scenery.  If I missed it, I apologize, what radius are you using, is it 48"?  Terrific job on it and as soon as my copy shows up at my door step, I'll be sure to look at your article first.

Thanks for sharing and keep up the great work.

J. Motts posted:

Melgar, that is a neat little layout... I really like what you've done and it is just chuck full of wonderful structures and great looking scenery......what radius are you using, is it 48"?  Terrific job on it and as soon as my copy shows up at my door step, I'll be sure to look at your article first.

Atlas O-54 on 60-inch table width... Outer rail about 3 inches from rear edge of table, 1.5 inches from front edge of table.

MELGAR

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×