I have had this metal roof from an old MYSTIC station in a box for years. So I thought I'd try and make something our of it. I started off making a rectangular box out of 1/4" plywood that the roof would fit on.
I then fired up the Model Builder program and began to play. This is the first attempt at printing and to my surprise the printer was our of colored ink. So 1st try is in B & W which really doesn't look too bad. Nothing is glued on yet.
With some fine tuning and a color ink cartridge this is what I've come up with.
I still would like to fine a picture of some bags to put in the doorway, however all the ones I find on line, the bags are too large and I can't figure out how to shrink them.
Note* I just used regular printing paper and sprayed it with lacquer. I also primed the plywood before gluing the paper to it.
Doug
