I am going to add an Ameri-town building front first floor to the side of an MTH bank to make another entrance. I plan on cutting a hole in the side of the bank smaller than the building front and gluing the building front to the side to add relief for the entrance. Which type of glue would work best to join these two plastics.
Joe
Replies sorted oldest to newest
I had a bottle of the Tenax 7R once. I used it once and lost the rest to volatization.
Just use Testors model cement (red tube). Inexpensive and works as well as anything else. Or you can use their liquid cement.
And it won't disappear while you're using it.
Just use Testors model cement (red tube). Inexpensive and works as well as anything else. Or you can use their liquid cement.
And it won't disappear while you're using it.
I'm like V but the liquid testors was a don't bother for me. I've been using the stuff in the red tube since I was a little kid. Still one of the best plastic glues out there.
David
Access to this requires an OGR Forum Supporting Membership
