If you wanted to do a double cross over with Atlas 7.5 turnouts would (what would) the correct cross over to use be? (reviewed related forums and didn't find/see the answer) Thanks, JP
Original Post
Replies sorted oldest to newest
If you want to use Atlas track, you need to use the #5 turnouts and the 22.5° crossing.
You'll need to add a 3.75 degree curve (1/2 of an 40.5/O-81 short curve section) to the diverging end of each turnout. Otherwise, you'll need to take the approach mentioned above.
@AGHRMatt posted:You'll need to add a 3.75 degree curve (1/2 of an 40.5/O-81 short curve section) to the diverging end of each turnout. Otherwise, you'll need to take the approach mentioned above.
Double Thanks - my first question was what turnout perfectly aligns with the 22.5 then is there a commercial cross or confirmation that works with the 7.5s. Thank You, Jim
