Atlas 2R Conversion Kits

as a rule, most freight used 33" wheels and passenger equipment 36".

looking at your inventory, I'd say all used 33" wheels, though not 100% sure about the flat car.

All cars are your list except the Berwick Hy Cube car will take 33" diameter wheelsets.  The Berwick car is rated for 100 ton so it will require 36" wheelsets - Atlas web site indicates that this car came equipped with 100 ton roller bearing trucks, i.e 36" wheelsets.  33" wheelsets are for cars rated for 70 ton.   

Scott

Yep, Scott is correct... All will use 33" wheels except the 60' Berwick Hy Cube boxcar which uses 36" wheels. 

Something else you'll need to consider is some of these cars may have came with trucks with rotating bearing caps on the axles.  These axles are not pointed, rather have a shoulder on them for the plastic bearing cap.  As of right now Atlas does not offer the shouldered axles replacement wheelsets.  NWSL does offer them though if you were wanting to keep the physical trucks you have now and just replace the wheels.

You could also get replacement trucks with the appropriate wheelsets already installed.   

I didn't know Atlas was still offering those conversion kits. I have several cars I'd like to switch over to 2-rail.

I'm in need of anyone's 3 rail trucks for some repairs of bad/missing trucks on my old cars...anyone wishing to sell their 3 rail trucks when you find your 2 rail type please consider me...I'd need about 3 sets of 3 rail trucks.

I can help you out Email in profile.