Skip to main content

4 replies

Atlas #6931 dwarf signal

R RRnewbieOGR Forum Member

i need help wiring an Atlas 6931 dwarf to an MTH scaletrax turnout. The turnout functions properly, but the dwarf does not change color when the turnout changes position. I have replaced the dwarf thinking perhaps the circuit board, jacks etc were bad but that made no difference. When power is applied to the track, the dwarf displays both red and green momentarily, then continuous green. Changing the dwarf wire connections to the switch machine did not help, in fact that only caused the constant green to change to constant red.

Has anyone experienced this before?

Original Post

Replies sorted oldest to newest

Steve HorvathSteve HorvathOGR Forum Member

The  #6931 circuit board was designed to work with the Atlas O switch motor which comes as part of the switch or can be purchased separately as part #6099. The design limits it's use to that particular switch motor. It will not operate correctly with any other twin coil switch motor I know of. The dwarf signal itself can be modified or adapted to work as a stand alone using additional wiring and components . 

PaparayPaparayOGR Forum Member
RR, this may be a little late but it is a complete tutorial of how to hook up the Atlas 6931 signal. Go to the Forum sponsor list and find Eric Seigel. He provides a lot of information on different topics. Go to his video section and look for Atlas switch hookup (part 1)and Atlas signals (part 2). Look at part 1 first to see how his test track is hooked up.Then look at part 2 on how he hooks up the 6931 dwarf signals. It is a very in depth and complete tutorial on what you want to know.

Ray

Add Reply

Views: 667
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×