Original Post
Replies sorted oldest to newest
Great post, thanks. I have a couple of beeps that I don't run as they stall going over my O-22 switches.
This was on my "to-do-list".
Nice set of pictures, I suggest one addition. Since you're using pretty small wire, consider adding a PTC in series with each wire that has about a 1A trip rating. Without any protection, if one of these derails and sets the center roller on the outside track, the #28 wire will become a fuse and you'll be wiring them again! 
The newer BEEPs (in yellow box) already have these connector plugs installed on both ends.
And the BEEF F-type units have connector plugs also so they can easily MU with BEEPs or other BEEFs.
Susie.
Good suggestion, John. Thanks. I have some PTCs at home.
Pat, you can probably guess why I recommend this, yes it's from personal experience!
Thanks for sharing this Pat. I have one BEEP that stalls on my switches.
Bob
