Rearranging things for a new layout and want to take the ZW I previously used for the TIU and move it to accessories. My layout is not huge and the planned loads for the TIU outputs should be less than 100 watts each . It seems the Lionel 135 watt units are a good value, even considering the adapter cable I will need. Any positive or negative experiences on the Z-1000 brick versus the 135 watt lionel power brick?
Thanks in advance!
Replies sorted oldest to newest
Why not a Lionel 180w powerhouse brick?
I have no input regarding the Z1000, but it has been discussed that the breaker on the old 135w Lionel brick is less than satisfactory.
While the 180w bricks have one of the fastest breakers in the hobby.
Good point and you nailed me, I have a bunch of fuses and I intended to be a cheapskate and get the 135w (about half price of the 180W in most places). Your suggestion gave me the motivation to rethink this. I had a z-1000 brick I stole from its controller and planned to add the 135 watt lionel. It is a good bet that the 180W will do all. Time to recalculate and maybe I can sell the Z-1000?
In continuing searches on the forum, for those interested in the 180W: this is a very detailed thread too.
I agree with RICKO!!! I have three loops all powered by the 180 bricks on the TIU. No problems.
They are always floating out on ebay for $125 or more. If you have the time and patience, you can usually get them for $70-80. I bought six of them last year in that price range.
Forget the other bricks, the PH180 is the one to buy! The main reason is the excellent circuit protection, not to mention it offers a full 10 amps at 18 volts, perfect match for stuff like the MTH TIU. 
I got rid of all the PH135 bricks I had, it seemed pointless to keep them in the mix with the vastly superior PH180 bricks available.
RickO, order placed and thanks for the link. I checked one other forum sponsor and they were $10 higher so I owe you a beer one day.
Access to this requires an OGR Forum Supporting Membership
