Circuit stops working

Take the plug out and rewire it with freshly stripped wires.

This happened with my garbage disposal about 10 years ago. A 30 year connection was refreshed and it has worked perfect ever since.

You have lost the neutral(white wire). 1) Check all the white wire connections in your breaker box. 2)Check the white wire on the back of the recept. With the circuit breaker off.  3) Call a electrician anything else could be a fire hazard. BE SAFE

I should that a light, fan and 3 outlets are in the run.

I thought if might be the neutral.  I'll check tomorrow.

Thanks

Assuming you do NOT have aluminum wiring, start at the outlet in the circuit nearest the breaker and check wiring.  If the circuit outlets are daisy chained through the duplex outlets with stab in connections that's most likely where the neutral is interrupted.  (or in a wire nut)  Side wire the outlets you check for more reliable connections.  The stab ins shouldn't be reused.

All outlets and switches are wired on the side connections.  Going to look at the switch where I think the outlets and switches are daisy chained from.  Hopefully that is where the return is loose.

Enjoy the weekend.

It's FIXED.  Traced the fault to the last outlet in the circuit.  Common wire singed.  Replaced bad outlet and everything works.

Thanks to everyone for the suggestions.

This forum is the best.  Put a problem out there and you get the answers.

See you at York.

Lou

Might be a good idea to inspect your other outlets too when you get time.

Dale H