In creating separate power zones in the track layout, do you create the blocks by putting the fiber pins only in the center hot rail, or do you block both the hot rail and the neutral rail using the fiber pins? (I don't run any reverse loops etc. Just simple straight power.)
Thanks,
Mannyrock
Replies sorted oldest to newest
You only need to have insulating pins in the center rail for creating power zones.
Happy railroading,
Don
Hi Manny rock, I see that you just joined the forum. Yes they do have a section on this forum for the smaller gauge hobbyists but for the most part our trains run on AC and power is provided by that infamous third rail. As I left HO many years ago only the two rail gauges, HO, N and Z are concerned with reverse loops.
Access to this requires an OGR Forum Supporting Membership
