Skip to main content

Replies sorted oldest to newest

TheDude23112 posted:

any way to get to the lights to replace with leds?

 

Yes... That is possible too.  You can buy LED bulbs that will fit the existing sockets, but that can be pricey depending on how many you have.  Here is the base of the MTH bank.

IMG_20200102_111745857

You can also retrofit an LED Christmas light if you have the time and like to do that sort of thing.

In the pic below, the bayonet bulb on the left was purchased.  The one on the right had the regular bulb taken out and an LED Christmas light installed.  Don't forget the resistor... Or it won't last long.

IMG_20200102_111801861IMG_20200102_111934720

You can also completely remove the stock lights and replace with an LED string. 

I purchased these mini lights on Christmas clearance.

IMG_20200102_113024498

I like these LED lights that come on a roll.  Easy to use and they can be cut every third light for nice customization.

IMG_20200102_113159147

Remember, LEDs prefer DC power to get the most life out of them.

Have fun.

Ron

Attachments

Images (5)
  • IMG_20200102_111801861
  • IMG_20200102_111934720
  • IMG_20200102_113024498
  • IMG_20200102_113159147
  • IMG_20200102_111745857
Last edited by Ron045

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×