I can't really tell just by looking - is there a way to get in there to replace the wire(s)?
Original Post
Replies sorted oldest to newest
Yes sir. Work from the bottom. Snaking the replacement wire is only challenge. You will get more technical advice from others. I am somewhat of a novice and I had no problem. That should give you comfort.
It must come apart here is a parts list for it.
Rewiring is easy:
- Remove cap
- Remove bulb
- Feed the wire in the pole, up the pole. This will reveal a fiber washer and spring. You can pull the wire our from the top.
- Unsolder the fiber washer
- Unsolder the other wire from the eyelet
At this point, replace the wires, and assembly is the reverse.
And now I have learned something. Thanks.
Ok - I see now...the contact is just sitting in there - nothing to take apart.
I have a bunch of these that seem like they were just ripped off the layout and have wires that are too short or missing.
Not sure how I missed that - but glad its an easy fix.
