Hi all,
I am sort of stumped. This is a first attempt to deviate from an oval. I have enough fastrack for a dogbone. I am considering switches, but wanted to see that it worked before I bought any more track (money is a real issue for me).
I can't seem to get the pieces to connect. Not sure how to "think" about what needs to be added to make it work.
Took me a while to realize about the extra switch pieces. At least RR-track wouldn't let me go on without them.
Replies sorted oldest to newest
Olstykke,
Try posting a picture of in bitmap you might get some responses from people who don't have rrt software.
Go to file
Click export bitmap
Copy the layout picture bitmap to your desktop
Post here
George
@ seacoast
Thanks for the response. This was really a first attempt. I can't seem to get the pieces to meet. I've tried a lot of different fastrack combinations and I am not figuring out a combination to get the ends to mate.
Olstykke,
if you dont mind me asking what track library are you using , i cant open your rrt files?
Thanks!
Olstykke,
What version of RR track to you have? Older version 4 or the version 5??
If you have 5 disregard my comments below.
Also when you post the photo above click on:
View
click on "home view or fit in window" save this photo (the one above is to big to see your whole layout)?
save the bitmap photo post to here again.
George
If you are not using 036 switches, then you need to attach the "makeup" pieces located in the switch pull down tab. Then the switches will join.
I just purchased version 5.
@cjack -- It took me a while to figure where those pieces were. They have been attached. The switches are 072(most of my engines require that as a minimum).
What i am having problems doing is connecting the ends.
Couldn't get the bmp to work so here is a pdf
Access to this requires an OGR Forum Supporting Membership
