I understand that the DZ1002 gives the DZ1000 ground. My question is are the push buttons momentary? If so what lights the LED's on the DZ1002?
Thanks for your input as I reason through some circuits for my control panels.
Original Post
Replies sorted oldest to newest
Wire them exactly as the diagram shows. They will work. Only issue is that you may have to reverse the red and greed light diodes. Note that the diodes have a flat side and need to be installed properly in the sockets that also have a flat side.
You might get this effect.
I'm asking the question as I'm interested in replacing the DZ1002's with toggles.
Originally Posted by MichRR714:
I'm asking the question as I'm interested in replacing the DZ1002's with toggles.
Momentary. 
Charlie did you get my email
Getting the switches to operate is easy with a momentary SPDT. Getting all the LED's to work properly is the tricky part.
If anyone else needs help with this as I did. Let me know.
Hey Guys
Looking at the above posts and have a question. Mike put me onto the Calterm 40393 LED rocker off/on SPST switch which I'm using. Is there a switch out there somewhere that is similar to 40393 as far as LED rocker but SPDT momentary on which I would like to try.
Best Regards
Tommy
