Hi all,
I'm planning and building a portable, folding layout ala OGR magazine article here: http://www.ogaugerr.com/PDF%20...20Away%20Railway.pdf
I'm in the process of deciding on the connectors to use for my control panel to layout connections. According to the manual there are 4 wires for each Fastrack switch to controller; yellow=RSC lights, red=out position, green=thru position and black=ground.
My question is this...can I use one common ground for all the switches to controller wires or is a separate controller ground required. If I can use a common ground it will reduce 10 wires and I can use a smaller connector(s).
Thanks
-rog
