I found a way to stop the lights from flicking on my 1960 passengers car. I wire each car together with a micro plug to look like a brake Line. Just unplug to separate to remove from layout.
I have done that with some of my diesel engines so they don't stall out when hooked together or when I use an unpowered B unit with a diesel horn it it. I found the small connectors & wires at a hobby shop that sells model airplane parts.
The capacitor and LED lighting is my choice for this task. If you are going to use a tether like that, I recommend using a PTC in the line for each car to avoid the issue of shorts during a derailment or crossing power districts.
When I have used a tether between cars, I like the Minitronics mini connectors, they're tiny and offer plenty of capacity for LED lighting.
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!