Help with Lionel ZWC TRANSFER | O Gauge Railroading On Line Forum

Richard GonzalesOGR Forum Member SUPPORTING MEMBER

After adjusting the throttle on my ZWC transformer the pin on the connector for the 90 w brick broke off in the transformer when I was reconnecting the brick

Is there anyone out there who could make this repair?

If I move the jumper over to the broken connector plug and plug the brick in where the jumper is now will that allow the inside throttle to function?

See attached picture.

HELP!🙁

Thanks!!

Richard Gonzales

Attachments

Hide

Images (1)

12/8/224:02 PM

Original Post

Replies sorted oldest to newest

Richard GonzalesOGR Forum Member SUPPORTING MEMBER

Well I answered the first question.

I found my instruction book and since the broken pin is next to the “A” terminal I would assume that my ZWC is dead and I’m not sure if it can be repaired.

Richard

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Hard to believe that connector can't be replaced, I'm sure it can be repaired.

Richard GonzalesOGR Forum Member SUPPORTING MEMBER

Thanks John,

if you can track down the part I will send it to you..

I would appreciate your help.

Richard

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Well, I don't really want it, but I can point you to the connector you need. Any repair shop should be able to replace it.

Molex 0010181032

Attachments

Show

Richard GonzalesOGR Forum Member SUPPORTING MEMBER

John

unfortunately repair shops are pretty scarce down here in the South.

can you get the part?

Thanks!

Richard

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

There's a link to the part in my previous post.

Molex 0010181032

Richard GonzalesOGR Forum Member SUPPORTING MEMBER

Oops,

See it now
RG

Add Reply

Sign In To Reply

<div id="{%=id%}" class="reveal-modal small h-alert-modal-popup" data-reveal>
    <div class="first-modal-focus focus-utility-element" tabindex="0" aria-label="Inside Modal"></div>

<h4 id="{%=id%}_title" class="margin-bottom-10 popup-title"></h4>
    <div id="{%=id%}_body" class="margin-bottom-10 popup-body">
        </div>

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>