I have a Williams GP38 powered and non powered. Love the engine but Sorry but do not like the horn and bell so I'm looking to change it. I have a Lionel Dummy f3 that has sound (gears were stripped so I made it a dummy for my working engine).
Is it possible and how hard is it to install the sound board from the Lionel engine into the Williams Engine.
Replies sorted oldest to newest
Fairly easy most likely. Can we see pictures of exactly what is in the Dummy F3? I'm presuming this is all conventional operation, right?
i'll get the pictures on tonight or in the morning
Thanks
The exact model of the dummy F3 would be useful as well, we might be able to look up the information on it. 
It is a Lionel FT Santa Fe Super Chief Diesel Engine. When I bought it the gears were stripped but everything still worked. I removed the gears and it now rolls freely. The sounds also work so when I push the horn button both engines blow the their horns.
I also have a Dale Earnhardt gp38 I use as a dummy because the sound board went out. Was going to replace the sound board however it was the same cost just to buy a new engine with sound, so I made it a dummy behind the new engine. I can still get another sound board through Lionel so which would you suggest to put in.
Thanks Gary
How about the Lionel model number for it?
Is this the locomotive?
https://www.lionel.com/product...C5B9&PageID=2061
Access to this requires an OGR Forum Supporting Membership
