Intermodal containers?

The longest K-Line O Scale intermodal container that you might be able to place in the bottom position of the MTH RailKing Husky-Stack is the K-Line 40' long container.

Anderw

In addition to length, width can also be a concern.  The MTH 20' and 40' containers, are known to be "overscale", or too wide.  Hence they won't fit in Atlas Gunderson wells.

Make sure you measure carefully before you buy, unless someone will give you one to test the fit.  I think your railking husky stack wells are 1-7/8" wide, so the k-line won't fit.

I have some Lionel trailers that I'm selling for a friend. If you're interested, my contact info is in my profile. I have photos, and can take measurements. 

Don

Jim, do a search for the "Intermodal Primer" thread that is on here.  Within the first page or two, as I recall, there's a whole dissertation on the containers from various manufacturers and what will fit where.  (I'm not sure how much space is devoted to Rail King however, as I think the discussion mainly focused on scale cars.  But it's pretty nteresting nonetheless.)

- Mike

It seems there is as many sizes as there are containers......I sized my scratch built cars off MRH RK cars.....so only MTH RK containers or my containers I make myself work.....mixing them is very hit or miss.......

THe Lionel trailers are 1 3/4" wide X 8 1/4" long

Don

I also have Railking cars with containers and I placed some K-line scale containers on top of the them. It gives the appearance of a 53/55 ft. car on a 48 ft. one that are seen frequently on today's railroads.

Joe B.