Skip to main content

My local train club has a Lionel Legacy SD40-2 (6-38940) which has a minor glitch. When the engine is run with the TMCC handheld, the revs increase or decrease with the speed. When the engine is operated under DCS (via the TMCC base), the revs remain in the idle setting. When I try to go under MENU>SOUND to change this, the remote says the engine is not found when there is power on the track. 

 

What is the issue? Is it somehow related to the drive motor board failure I mentioned in a previous topic? 

Original Post

Add Reply

Post
The DCS Forum is sponsored by
×
×
×
×
Link copied to your clipboard.
×
×