Skip to main content

This set is new to me, but I’d like to investigate kicking the end of train lighting up more than a notch.  Anyone do this?  If so, how did you light the three aspects, and was the end result worth the effort?  Any problems to watch out for?  I have done this modification to other observation cars using Stan2004’s method, which worked well, but this car has an interior and “streamlighting” which may force a change in method.  Any advice out there?  Thx in advance.

FE9B5F4B-7EF4-4CF8-BC0D-011C07C44836

60904179-B6EB-4F01-8EC8-4C26299BFD61

F557A9A6-6EAB-4719-8FE4-BB9CA269BC33

F1EA9D66-E5DC-462E-ABF4-8E8BC5297D2F

 

Attachments

Images (4)
  • FE9B5F4B-7EF4-4CF8-BC0D-011C07C44836
  • 60904179-B6EB-4F01-8EC8-4C26299BFD61
  • F557A9A6-6EAB-4719-8FE4-BB9CA269BC33
  • F1EA9D66-E5DC-462E-ABF4-8E8BC5297D2F
Original Post

Replies sorted oldest to newest

Thx guys, got a handle on led sources.  Was looking at methods of install.  Discovered burned out grain of wheat bulb for EOT white light, so that was replaced with a 3mm led.  Problem with the red marker lights is that they are just blobs of plastic formed into a lens pegged to each side of the car(see pic).  Any suggestions other than to bore a hole through car wall and into red lens(each side I guess) 4 holes, then glue in a nano or pico led into the hole?   Wonder if they will be too bright!?  Those little leds put out a lot of light.  Welcome any and all ideas. Won’t go further till I have a good plan.

485061BD-2EBB-44AD-B8C0-C6CE92873130

76FB9B95-D416-4FC2-824B-3DA2ABD69FF7

0C7E8F8C-873A-405D-9C9B-D4C6B1AE70B5

 

 

Attachments

Images (3)
  • 485061BD-2EBB-44AD-B8C0-C6CE92873130
  • 76FB9B95-D416-4FC2-824B-3DA2ABD69FF7
  • 0C7E8F8C-873A-405D-9C9B-D4C6B1AE70B5

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×