Skip to main content

Working on our layout plan and trying to determine if we have sufficient room for a TT and RH.  I'm thinking of the Millhouse River 28" TT model.  If I use the Millhouse River TT, how much track length would I need between it and the Korber RH?  And, just for clarity, what exactly are the dimensions of the Korber RH - the exterior gross dimension (i.e. how much actual real estate do I need for this entire set-up) for a 28" TT and either a 3, 4 or 5 stall RH?  Also, will I need more track length between the TT and RH as I add RH stalls so that the tracks in the RH don't angle too dramatically?  

Thanks! 

Peter

Last edited by PJB
Original Post

Replies sorted oldest to newest

No, there will be over a foot of space between the edge of the turntable and the front of the roundhouse.  Kit 304 is a large roundhouse and supports big engines.  Korber made a smaller roundhouse, Kit 220.   I don't have dimensions for that one.  It would set closer to the edge of the turntable.

You might want to look a the Atlas or another manufacturer.  It appears that the roundhouse sits about 6" aqay from the turntable.

O%20Cover%20Image[1]

Footprint%20diagram[1]

Jan

Attachments

Images (2)
  • Footprint%20diagram[1]
  • O%20Cover%20Image[1]

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×