LEDs for O scale model railroads by Evan Designs

LEDs for O scale model railroads by Evan Designs

Evan Designs is an OGR advertiser.

Evan Designs sells various size LEDs in various colors that are ready to install in model railroad applications. The LED sets include prewired limiting resistors and rectifiers (where necessary) for powering by AC or DC voltages. Both steady and flashing LED varieties are available from Evan Designs. The Evan Designs website also provides LED tips to assist the modeler. A photo of a sample flasher LED product is shown.

For more information click on the ad spot or use the following web link:

http://www.modeltrainsoftware.com/ledlights1.html

This Flashing LED comes fully assembled for "plug and play" use. Use with a 9 volt battery, a 12 volt battery or a 12 volt wall adapter. LEDs come with a Resistor and 8" of wire already attached. Ready to use.

This Flashing LED is what is called an "Integrated Circuit" LEDs. The flash circuit is integrated inside the LED asembly. No other Circuit Board is needed to produce the flash.

Attachments

Show

4/2/1511:58 AM

❤️ 1

Original Post

Replies sorted oldest to newest

Gerald MarafiotiOGR Forum Member SUPPORTING MEMBER

Great people to deal with,extreamly helpful with any questions you may have,&fast shippers,also for people like me who don't have a lot of knowledge about led bulbs they will be very helpful to you.

4/2/1512:08 PM

❤️ 0

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

Note that for a flashing LED, you MUST provide it filtered DC, just rectifying AC will not enable the flashing.

4/2/151:24 PM

❤️ 0

prrhorseshoecurveOGR Forum Member DIGITAL SUBSCRIBER

I have used these with great results. MTH uses 5mm led's for their locos and I used this circuit to power dummy locos with the flashing beacon. I also used the 3mm led's to power up the MTH Amtrak Material Handeling car ends with a 3 way switch mounted underneath to turn as well as manually contro direction of the flashing led.