I have a Industrial water tower that the top light does not work and I found a place that I can get a LED. But they sell 3 sizes..Any of you know what mm size those are??
Original Post
Replies sorted oldest to newest
Dougie fresh posted:I have a Industrial water tower that the top light does not work and I found a place that I can get a LED. But they sell 3 sizes..Any of you know what mm size those are??
What brand is it and what is the part number? Most small LED lights should be able to work, just get the proper voltage supply unit or transformer to use with the light.
Lee Fritz
Measure the diameter of the LED. My guess is it'll be either 5mm or 3mm.
It on a MTH water tower. Dang thing has not worked since I bought it new..Pooh.. I was surprised to take the top off and find all this ele stuff..stuffed into it..I did try putting power right to the CB..but no joy..
It has a flashing circuit I would imagine. I suspect the circuit may be bad and not the LED.
well I'm going to take it out and just put a light in it...If I can figure out the size
