I use TMCC Cab 1. I bought a Lionel 2132100 Baby K4 #3750 from the LC Plus 2.0 line, used. It came having Engine ID No. 1. Sold to me in 2021. It runs, sounds, everything fine, using Engine ID #1.
I just can't change the ID number like I would like to. I have tried everything I could come up with to change the engine no., without any success. I have done the full factory reset (described in the Owner's Manual):
- TMCC Base unit and power off.
- Set Run/Program switch on engine to Program. Place engine, connected to the tender on the track.
-Turn on base unit then
-Turn on track power.
- press "Eng". then "ID no." then "Set", followed by:
- "AUX 0" holding the 0 down. It does not "chirp" or make any sound like it is supposed to.
I tried the full procedure several times, using both road numbers separately, "1" and the road number "50".
It still only responds to commands as Engine #1.
Hmmm?
