Skip to main content

I am restoring a few operating accessories for a friend, the 264 Forklift and the 342 and 345 Culverts.

I cleaned all the parts, replaced the wires etc,  I sanded them smooth and got rid of tarnish, rust etc. What kind of paint could I use to match the black stamped metal bases to be as close as possible as the original color?,

Black Satin, Matte or Semi Gloss? I was also looking into getting a metal blackening kit, but for now I want to stick with either Restoleum or Krylon paints.

Thanks in advance

Original Post

Replies sorted oldest to newest

It’ll depend on how much work you want to go through. Many of the Lionel accessory bases are just black oxide. It’s a process where the sheet metal parts are dipped in black oxide ( basically an acid ) then dried, and soaked in oil. The idea being the oxide will suck in the oils, thus preserving the metal. Over time, obviously Mother Nature takes over and the components eventually rust……For what you’re doing, I’d choose a satin black, and just lightly dust the parts for the best look,……Just be mindful of any ground wires or binding posts that are part of any base, and could be affected by paint impeding an electrical connection……

Pat

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×