I think it's a 'standard' [simple] 2-coil transformer which, if true, puts out pure 'sine-wave' power. Am I correct? Or at least partly so?
Original Post
Replies sorted oldest to newest
Yes, pure sine wave output.
Thx, Rob. I assume that I can then use my Supco multimeter to measure voltage & current, then apply P = E x I to calculate 'average' power.... . [ Like this: From the lionel brick specs: 18 x 10 = 180 watts, for max power & amps.]
You can, you will notice that the voltage may drop some below 18 volts under load(16.5-17.0, eg.), and the PM breaker will cut out at 10 amps regardless of total wattage being consumed.
