Hello, Quick question I picked up a four searchlight tower from eBay and have been trying to clean it up. I have hooked this up to the the tracks once or twice but it doesn't work and I can't see any reason why it shouldn't. I have tried searching online for instructions or pictures of a working one but no look. Does anyone see a reason why the lights below shouldn't work (the bulbs were taken out after testing but nothing lit up when it was plugged in with the bulbs installed).
Replies sorted oldest to newest
Have you tested the bulbs? I think they are paired in series, so a bad bulb affects the others.
Check for continuity on the buss bar in the middle. Also can check with test leads bypassing the buss bar.
Frank
Thanks John and Frank!! I tested the continuity and that was good so I tried it with all fresh bulbs and it worked. There must have been a couple of bad ones in there previously because I did use some new bulbs in there when I tested it. Thanks again for the help!!
Access to this requires an OGR Forum Supporting Membership
