Skip to main content

Replies sorted oldest to newest

So l took a chance last night and opened up the "box" in the middle of this car.  All wires were intact so I check the voltage from the small board and it was 5 volts for the tress and perimeter lights. Hum, I then cut and stripped the 4 wires , 2 on each side for the lights.  Those wires while small,  are strong and coated. Had a 4.5 v battery pack and used it to find the culprit.  Seemed, where the bare wire was soldered to the stranded wire before plugging into the board was the issue.  Pulled the wires apart with ease.  After I jumpered the wires, voila !  We now have lights.

Merrry Christmas everyone

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×