I have to be missing something very simple here:
AC to relay red
Common to Relay Black, Bridge Black
Relay White to Bridge Green
Relay Grey to Bridge Red
Bridge tests OK with straight power
Relay seems to be working
Is the relay powerful enough to run this signal bridge? The Z-Stuff instructions say yes for cantilever signal.
Thank you for your help!
Dave
Replies sorted oldest to newest
Dave:
Diagram shows the use of the 1008 relay also. 1008 relay is a latching relay, that might have a lot to do with this application.
Note (1): The Blue power into the relay. NC/NO contacts (White and Grey) are energized via this Blue wire.
Note (2): The DZ-1070 sensor White wire to Green wire DZ1008A would be the trip circuit that causes the relay to function.
Mike
Mike,
Home layout. Works like a charm.
Dave
Access to this requires an OGR Forum Supporting Membership
