I have a mth railking m10000 with a 5v ps2 board and when i apply power to the track conventionally the engine is silent and will not turn on
Original Post
Replies sorted oldest to newest
PS-2 engines will not operate conventionally without a charged battery.
the battery is charged and the breaker keeps tripping on the power brick. I does that on conventional and dcs
Sounds like the board failed and is shorting. Or you have an engine short. If you take shell off and unplug the 7 pin connector which powers the board from the track and the short goes away, the board most likely has failed or the regulator that has 3 thick wires going to it is grounded. Normally it is a board failure, but worth checking the regulator. G
