MTH SD-70 (PS2) Snowplows

Can’t provide feedback on the newer SD-70 as I have none but the fit on the PS3 ES44AC snowplows from last year are much better than those on my PS2 SD70M-2 from 2006. The newer snowplow don’t stick out as far as the older ones, the holes under the plow line up perfectly with the bosses on the underside of the frame. The only issue would be that the multiple-unit hoses don’t line up perfectly with the openings in front of the snowplow but the hoses & end-fittings appear closer to scale than the hoses on the PS2 SD70M-2.

These are just my opinion,

Thanks,

Naveen Rajan

Thanks Naveen. Yeah that's exactly my take on the older snowplows. I'm surprised MTH didn't offer a modified snowplow for us to put on there.

I just drilled a couple new holes and accepted the fact the MU hoses won't come through.

Great model just a minor glitch.

Thanks!

Chuck

Yes, Chuck it is fixed.

I have the 2-rail UP SD70ace in PS3.0 and the snowplow fits tightly up against the pilot, for a prototypical look.

One of my PS2 Heritage acquisitions had the snow plow mounted. The original purchaser had drilled two new holes in the mount about 1/8" in from the original holes and it looked pretty good. Planning to make the modifications to the plows on the other units and mounting them. The re-positioning doesn't interfere with operation.