Skip to main content

Replies sorted oldest to newest

I had a set of the original cloud stencils.  After using them a few times with my daughter, I decided to use some Blue Masking Tape to tape them to 4 foot scraps of thin wood, roughly 1" x 1/2" x 48 " long.   It made them "more rigid" and much easier to hold in place during the spray paint process.  So if you decide to print out your own, or free hand cut them out of poster board, or card stock with a sharp knife, I'd recommend attaching them to sticks, even some wood dowels 3/8" diameter might work just fine. 

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×