Hi,
I know that this was probably covered before, but what NWSL wheelsets would work for changing the newer 3-rail Atlas 100 ton RB trucks over to 2-rail (these are the ones with the rotating caps)? Since Atlas is discontinuing (or has discontinued) their 2-rail conversion kits, this is my only option at the moment for converting their 3-rail cars over to 2-rail.
FWIW-I would need a 36 inch wheelset for the Trinity hopper.
Thanks,
Robyn (CarolinaRail)
Replies sorted oldest to newest
Looks like they're posted on page 3-11 as Atlas spinners. You pic the wheel and tread size too.
http://www.nwsl.com/uploads/ca...ap3_for_web_9-20.pdf
looks like 8298 or 8898 (with the -4 for 4 axles if that's enough, or -100) depending on the tread you'd like. Probably the 172?? Larger profile.
Hi Joe,
Thanks for the link. The .172 I believe is the standard O flange while the .145 is the "semi-scale" version. Everything below that is geared toward the Proto:48 realm which I'm not ready for just yet.
Again, thank you for your help.
Robyn (CarolinaRail)
Access to this requires an OGR Forum Supporting Membership
