Skip to main content

Anyone know of a reasonably priced 1940s/1950s diecast ambulance of an american model? I see you can easily buy one for $75.00 (the cadillac superior) or more (the Brooklin models) but I was hoping for something that costs less. The only ones I've seen so far seem to be models of foreign makes. Thanks.

Jerrman
Original Post

Replies sorted oldest to newest

I found a late 30's ambulance at a shop pretty cheap. It was part of a series that was orginally marketed as collectables, but apparently didn't sell well. I don't remember the manufacturer and it's put away right now. Anyway, one was made, and it was well done.

Another source of late 50's ambulances would be old Corgi and Dinky. I have seen both Cadillac and Pontiac ambulances on ebay. Excellent ones are pricey but you can find a beater pretty cheap and restore it. Repro tires and parts are available as well.

John
Last edited by John23
quote:
Originally posted by Joe Hohmann:
Based on this, the answer is "no" (not less than $89.). Look at it this way...you only need one, so spend the bucks.


There's a show in a few months in my city and if I can't find something like John23 did, then your suggestion may be the default one...i.e. just go for it.

Jerrman
I found a beautiful 1936 LaSalle Hearse on Ebay. The cost, with postage was about $70. It is part of the James Bond Dr. No collection and not readily available over here. Why? Good question! It is beautifully rendered. It will be used with a Victorian Funeral Home I am building for a client.

Die cast collectables are expensive, but if that is all you can get, the question is - do you really want/need it? If so, then buy it. O scalers spend big bucks on locomotives and rolling stock yet many still use dime store autos along side them. I can't figure that out. Do you want a real detailed miniature or junk? We all have to make up our own minds on that one.
Tom
As recomended to me in my post regarding this same topic but looking for a station wagon do an internet search for a company called Sabra. They are made in Israel. Can also be spendy unless you can find one in played with condition. I lucked out and got one off eBay fairly cheap. There is one on there now but it is on the high side.
quote:
Originally posted by tom yorke:
I found a beautiful 1936 LaSalle Hearse on Ebay. The cost, with postage was about $70. It is part of the James Bond Dr. No collection and not readily available over here. Why? Good question! It is beautifully rendered. It will be used with a Victorian Funeral Home I am building for a client.
Tom


I agree. I bought mine from a dealer at York last Spring (Orange Hall).
Also bought a black Cadillac limo. (same approx. year) to go with it.
Jerrman what you do is make your own ambulance. You can start with a Road Champs 53 Chevy panel truck, RC 55 Pontiac wagon or a Yat Ming/Road Signature 57 Chevy wagon. Paint them white add signage, the panel truck can be found in white. You will need a RC 57 Ford or 55 Chevy police car for a donor car for lights and siren. These are put together with screws. If you use a Sabra beater you have to drill out rivets to get the base off to do a better repaint, a donor car is also needed for parts and its best to change out the wheels. Total cost should be under $30.00.
On ebay you can sometimes find a used Brooklin 1940 Ford panel truck or 1953 Pontiac panel truck for $50.00 or less. Those require a make-over also.
BTW if anyone is interested I have the 1937 Studebaker hearse F/S.
Bob
Remember that in the '40s and '50s most ambulances operated in the "scoop and go" mode. There were no EMTs and Paramedics as we know them today. City hospitals might have an intern or resident riding the ambulance, but training for the drivers and stretcher bearers was very rudimentary. In most urban and rural areas the local funeral director often provided and staffed the ambulance. What this means for the modeler is that just about anything that could carry a six-foot stretcher could be and was used for an ambulance. Funeral directors used hearses with bolt-on lights and sirens. Similar vehicles were used by some hospitals and fire departments (painted red or white instead of funeral black). Panel trucks and station wagons are both excellent candidates for conversion into ambulances during this period.
Though representing an ambulance at the later part of your era, the Ghostbuster's Ecto-1 produced by Hot Wheels (1/43) would be neat if it could be altered by removing some of the stuff and adding a red flashing warning light. They are available at a bit lower price. And with a possible new Ghostbusters movie coming out, it looks like a new model of Ecto-1 will be available for pre-order.


http://www.toywiz.com/cultclas...GWha0CFYWo4AodlQysCQ

Rick
Rick, I've considered converting the Ghostbusters version. Still not a bad suggestion. That link you provided is a very good price.

Don, that eBay search is exactly where I started and I've kept tabs on it (as well as anything on 1:48 or 1:50 scale. Then I thought I'd ask to see if anyone had any other thoughts.

Thanks.
Jerrman
quote:
Originally posted by dgauss:
The Studebaker hearst offered by BK above, is a very nice model which could be repainted. BK is a good guy to work with very fair in pricing, too. Dave G.


Thank you Dave. A couple are still available.If anyone is interested check page 3 or 4 on the forum buy/sell.
Merry Christmas,
Bob
quote:
Originally posted by AlanRail:
Jerr

I am wrong the Corgi top lights blink; it's the Dinky Toy version that has two drivers and two stretcher bearers. The Dinky toy is a Pontiac that is slightly longer than the corgi


Thanks, Alan. Now my friend, Buzz, who's obviously been keeping up with this thread from another state, says he's had enough and I should stop obsessing about this ambulance thing. So I will do that...unless someone else comes up with another great suggestion like yours :-)

Jerrman
quote:
Originally posted by Joe Hohmann:
quote:
Originally posted by John23:
That Pontiac ambulance looks like a 59 or 60. But being Exc condition with a box, it's a bit pricey!

John


It's a 1966, and the scale is 1:47. This from the model car reference book "American Wheels".

Definately NOT a 1966, they are either wrong or referring to when the Dinky model was built. I looked at a GM website showing all their cars of the 60's, and the Dinky most resembles the 1961 big Pontiac.

Anyway, 1:47 scale is pretty close to O scale (1:48). Big Grin

John
quote:
Originally posted by John23:

Definately NOT a 1966, they are either wrong or referring to when the Dinky model was built. I looked at a GM website showing all their cars of the 60's, and the Dinky most resembles the 1961 big Pontiac.

Anyway, 1:47 scale is pretty close to O scale (1:48). Big Grin

John


You are correct...my book is wrong (they only refer to the car year).
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×