Ogre Modeling LED Bendable Pan Lights

So are these bendable arms with shades? Could I replicate these "dummy" lamps found on woodland scenics prebuilt structures?

Yes, these are bendable and are excellent replacements for the WS buildings.  The shades come in three colors: Green, Grey, or Rust.  They are also available in 1/2 inch non-bendable for use under porches and for inside roundhouses.  These only come in green but can be repainted with any hobby paint to colors that you desire. They come 4 to a pack with 2 bridge rectifier assemblies that allow them to run off 6-19 volts ac or dc.  They may be connected 1-2-3 or 4 lamps to 1 bridge rectifier assembly or you can put 2 or 3 on one and the remaining on the other rectifier  The shafts are 2 1/2 to 3 inches in length.  Cost is $22.95 or 2 packages for $40.00.  The shafts can be attached by drilling a hole and using ca glue.  Sometimes a backing board to stiffen the shaft is a good idea(I use a small piece of scrap 1/4 inch basswood or a piece of plastruct.  They have been very reliable, out of 400+ sets that have sold, i have had one set not operate properly(due to bad bridge rectifier assemblie) and I replaced that set for free and covered the shipping costs.  I have been using them for about 2 years at shows with Scenic Express displays.  Those displays ran off 9 volt batteries, Electrical power converters(6V+ cell phone chargers I picked up at flea markets for 50 cents, or Transformers) Happy to answer any questions that you may have. website is being completed as we speak..until then ricbau936@verizon.net.  These are for sale at Pat's Trains and at Mercer Junction as well.  I do have wholesale pricing for dealers.  Thanks for asking.

Rick,

 

I just love these lights!  I replaced all of the lighting in my roundhouse and it looks fantastic.

 

Dave

 

This sure looks like an incredible new product. I will stop by to see it in person.