Skip to main content

Closed2 replies

Operating Culvert Loader dimension and operation?

StrogeyStrogeyOGR Forum Member
Is there anyone out there in OGR forum land that can measure the footprint required on the loader side of the siding. I do not need the footprint of the entire unit, just the space required for the building side of the track.

Also how tempermental is htis accessory? And if tempermental what tricks/tweaks are needed to improve performance.

Thanks!
Ken
Original Post

Replies sorted oldest to newest

wb47wb47OGR Forum Member DIGITAL SUBSCRIBER
The placement of the track is quite sensitive so that the culverts drop into the car correctly. When done right it works good. Just got a new one. There is a small adjustment on the electronic switch stop of about a quarter of an inch. I have always liked this accessory.
Views: 550
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×