Skip to main content

Hi GUYZ,

  I currently have a 15 x 16 foot layout with three loops.  They are powered by three 180 watt Lionel power bricks.  I am running Lionel Legacy and MTH via a TIU with the bricks.  I would like use four switches to inter connect only the first two loops that I can switch loop one and loop two with each train.  All the 180 watt bricks are in phase.  Do I leave the 180 watt bricks as is and have 360 watts of power for doing this?  Or do I eliminate one brick?  I also should mention that I will be running a 8 car passenger train X 2,  or 8 car Passenger train and freight, on each loop.  Is there any problems leaving the two 180 watt bricks hooked up as is now?  I do not want to harm any electronics in this set up.  Any suggestions are deeply appreciated. 

Original Post

Replies sorted oldest to newest

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×